***Hoku Clicky Reflector Bezel Start Here - Step 1 ***

$300.00 - $475.00
  • ***Hoku Clicky Reflector Bezel Start Here - Step 1 ***
  • ***Hoku Clicky Reflector Bezel Start Here - Step 1 ***
  • ***Hoku Clicky Reflector Bezel Start Here - Step 1 ***
  • ***Hoku Clicky Reflector Bezel Start Here - Step 1 ***

**PLEASE SELECT A BODY/BEZEL DESIGN AND THEN PROCEED TO STEP 2 ON THE MAIN PRODUCT PAGE TO SELECT A LIGHT ENGINE AND THEN TO THE FLASHLIGHT POCKET CLIP PAGE TO SELECT A POCKET CLIP IN ORDER TO BUILD A COMPLETE HOKU**

**Please record in the purchase notes if you would like a tumbled, Zirblast, or satin finish body/bezel.**

The Hoku is a user programmable tail switch activated flashlight based on a 10440 (AAA sized) 3.7V lithium ion cell that consists of 3 main components, the body, bezel, and the light engine.

To install a battery, grip the body/clip section and the center engine section independently and twist them in opposite directions to gain access the battery tube.

The Hoku Vial Slot Body features 18 milled slots to accommodate 1.55mm x 5mm tritium vials. We do not sell or install tritium vials. Vials can be obtained by contacting Bart of Candlepower Forums fame at [email protected]

Left to Right Pictured Examples:

1. Satin Copper with Brass Dimple Engine and Short Clip
2. Satin Titanium Vial Slot with Titanium Straight Groove Engine and Short Clip
3. Satin Titanium with Copper Dimple Engine and Regular Length Clip
4. Satin Brass with Aluminum Dimple Engine and Short Clip
5. Satin Aluminum with Brass Straight Groove Engine and Regular Length Clip

Includes a 10440 rechargeable cell within the US, custom microfiber pouch Made in the USA by Dragoncut Designs, maker card, and sticker.

Specifications:

●Driver: FET driver with guppydrv Rev.1, default programming 1% - 25% - 100% w/ memory
●Emitter: Nichia 519A 4500k
●Pocket Clip: Titanium Short Length No Logo or Titanium Regular Length No Logo
●Pocket Clip Screws: Carbon Black or Stainless Steel
●Reflector: Machined in-house from 7075 Aluminum
●Mechanism: Reverse Clicky Tail Switch
●Included Cell: Single 10440 Flat or Button Top. Flat Top Preferred. REMOVE PLASTIC FROM POSITIVE END OF CELL. Recommended cell: https://illumn.com/batteries-chargers-and-powerpax-carriers/batteries/10440-efest-imr10440-v1-350mah-high-discharge-flat-top.html or https://illumn.com/batteries-chargers-and-powerpax-carriers/10440-vapcell-inr10440-320mah-3a-high-discharge-flat-top.html

*To install a battery, grip the body/clip section and the center engine section independently and twist them in opposite directions to gain access the battery tube.

Dimensions:
●Diameter - .63"
●Tail Diameter - .70"
●Body Length - 3.6"

**Available only for the purchase of a complete flashlight**
**Only one body/Bezel per complete flashlight ordered**
**Built to order, so please allow time for finishing and assembly. Will typically ship within a few days **

*Standard shipping is USPS Priority Mail. Please contact us for the availability of other shipping methods.

*International buyers are welcomed and encouraged, but please realize that some international packages from other light maker/sellers have been lost and/or confiscated by local customs. International buyers are explicitly accepting the liability and risk of any lost, stolen or confiscated packages. On the customs form, full value will be declared.